This Custom Top Plate is for the Louqe Ghost S1. It helps to reduce unnecessary noise from fan turbulence.
Keep in mind to have a clean cable management (risercable and GPU powercable), otherwise the cables might reach into the fanblades.
The main print consists of three files:
The bolts are used to join the two top plate pieces along the edges (this is a press fit, you might want to use pliers/tweezers).
Additionaly, you can use some superglue to glue the overlapping parts together (see picture #4).
The bracket is not necessary, however it can facilitate the gluing.
IMPORTANT
The custom top plate needs the fans/radiator to be mounted with srews. This gives the whole assembly the needed rigidity.
Inspired by PippoAe's Ghost S1 Radiator Bracket:
https://www.thingiverse.com/thing:4594718
I used a 0.15mm layer height (0.2mm might work as well [not tested, tolerance could be a problem]) and five perimeters with PETG.
A more rigid filament, if available, is strongly recommend (e.g.: ASA, filament with carbon fibers, etc.), as there is a bit of bending with PETG.
The biggest part is roughly 18cm (w) x 14cm (l) in size.
The author hasn't provided the model origin yet.