PSVR2 Controller Knuckles Attachment

This is an insert for the PSVR2 Sense controller that offers basic parity with the Valve Index Knuckles controller (the controller encases the hand so you can fully open your hand without dropping the controller, this is very helpful for mimicking throwing actions). Unlike the knuckles, this insert is not adjustable, is made to fit a medium size hand, and can be tailor printed for your hands. There are two parts, the Mount Plate, and the Hand Plate. The Hand Plate is modeled off of a scan of my hand in the controller (my glove size is medium), so if it doesn't fit how you like, print it separately and scale it in the Z direction on your slicer to adjust the distance between it and the hand grip of the controller until your hand fits between, not too snug and not too loose - then glue the two parts together.

*Do not adjust the mount plate at all or it won't snap in and sit snug on the controller.

This is a PIP part, no supports, and snaps into the controller very easily. Simply mirror the part for the left controller. You can find assembly instructions in the image gallery.

If you don't like the plastic against the back of your hand, glue on a strip of fabric or felt for greater comfort.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

Any

Infill:

5% min.

How I Designed This

Design process

I used the PSVR2 controller model posted by vorinami (https://www.thingiverse.com/thing:5878903) to model the mounting plate to snap onto the controller's handguard. Then I scanned my hand in the controller, aligned the rough scan to vorinami's model, and lofted the space between with several profiles to make the hand plate.