a simple system for opening a door upwards and sliding it away in the cabinet.
distance top door -top cabinet= 4mm.
distance top guide - top of cabinet= thickness door+4mm.
distance top of hinge - top of door=21mm
Attach the guide to the cabinet wall and the hinge to the door. then slide the door in and push an 8mm wooden dowel into the hole of the hinge.
I printed mine in PETG, 0.3mm layer height, 20% infill.
You need:
- 2 hinges
- 1 guide
- 1 mirrored guide.
- 12 3.5x15 wood screws
- 2 8mm wooden dowel
In the photos my guide on the right side is 1mm too low (or the hinge is too high)
The author marked this model as their own original creation.