Miata MX-5 ND almost invisible action cam mirror mount

This holder can be attached to the mirror of a Miata MX-5 ND 2016. 

The diameter of the mirror holder of the Miata is 19.2mm. The clamp is designed according to this. I kept it minimal as possible to reduce weight but still keeping it stable.

I use it with my action cam (not GoPro) and it works great (see pictures)

I believe in free designs therefore I added also the FreeCad file. You are free to use it to e.g. adapt the length (which might be necessary if you want to use it with a GoPro). Go to Sketch and change the length. My design is based on the length, means Holes etc. should move accordingly.

I printed it using PETG and 0.2mm layer height. I needed supports for camera side with my filament otherwise it will not be as round as it is intended to be...

You additionally need 2x M5 nuts and GoPro screws for fixing the clamp and camera.

Have fun and enjoy it.

20241103: increased hole diameter for hinge. Should now be printable more easily; added version with detachable clamp.