Rigid R2401 Trim Router Base for LowRider 2 CNC

I didn't like dedicating my trim router only to the LowRider 2 but since there is not a way to buy an extra base, this was my solution.

Print instructions

Printed using PLA (time will tell if this was a good idea).
.4mm nozzle, .3mm layer height, 20% infill, 4 perimeters.

Mounts to the LowRider2 base using 4x 8-32 machine screws (needs to be tapped for threading). Screw holes are on a 55mm centers, same as the stock base for the Rigid R2401 Trim Router.

Clamps with a 1/4-20 nut and bolt.