Box for Omnifixo Makers Third Hand

Used Walter's SCAD (Thingiverse) parametric model to build this Omnifixo case or box.

Remodelled the lid with emblem of Omnifixo (graphics copy, then traced in CorelDraw!, exported as SVG and imported in TinkerCad. Eventually redrew all lines to make them a hair thicker (wider). It is a real heard job for a printer to print these contours properly. 

I sized the emblem to 0.8mm thickness, cut the contour appropriately 0.8mm into the lid. Then printed it on my Prusa MK3 with MMU2S. Container printed on Voron 2.4 (350). I am totally happy with the result. 

Designed a simple box for the hands and magnets. gave it a divider, which can be glued in or not. Precut grooves are already in the box. So doing the divider is up to you.

You will need 8 Neodyms of Ø6x3mm acting as "hinges".