Upgrade for Eibos Cyclopes from radial to Axial rolemount

This is a upgrade for the Eibos Cyclopes filament dryer to mount filament rols axial insted of radial.
11
57
2
631
updated March 4, 2023

Description

PDF

This is specaly for soft roles like from sun.

If you want the short version to replace only one side you need:

  • 2x Leg
  • 2x holder short

If you want to replace the whole place you need:

  • 2x Leg
  • 2x holder long
  • 1x Axis

For the short version you can reuse one of the axis from the Eibos.

For the long version just reuse the bearing from the Eibos axis.

Be aware that every side has a small nose to snap in so it can't open it by it self.

This is a tight fit so you may need a bit of force to place the holder.

Here are my print settings:

  • walls: 4
  • upper walls: 4
  • lower walls: 4
  • Filling: 30% and Gyroid
  • Print every part separately and laying flat on the print surface for the nessecary stability!

Maybe you have to sand the axis a bit to get smooth.

Tags



Model origin

The author marked this model as their own original creation.

License