Prusament Lamp Remix for IKEA Lamp Kit

Many people loved the Prusament Lamp project https://www.prusaprinters.org/prints/37371-prusament-spool-lamps

The issue for us in North America is the lamp needed was $8 each without the lamp cord, switch etc. So this allows you to grab a IKEA Lamp kit, a cheap lightbulb, a used Prusament spool side, and put it all together.

Follow the original instructions. The ikea is strong enough to hang from the cord, also in my design you can mount on the wall. I totally remade the base for the lamp.

Print instructions

Print, assemble. Mount the ceiling mount to the ceiling. Then assemble the spindle with a standard skateboard bearing. I glued my spindle together and you should too.

Print the Frame Side A and B. You'll need three M3 35mm bolts and three M3 nuts.

Once your spindle is assembled and dry... Assemble the spindle in the frame sides. Put the bolt and the nut through the center of the spindle bearing.

Attach the Celing Block to the ceiling with anchors. Then pull the cord through frame, then simply slide onto the ceiling block.

I attached the cord to the wall with the WALL BLOCK with TEETH. See the picture to see how it is used. This is my design and it works great.