SKR Mini E3V3 - RPI - U2C - LM2596 Mainboard Case

Remix of parts of two main board boxes.

This is set up to hold SKR Mini E3V3, RPI, U2C Canbus and LM2596 Buck Converter

Mount holes are at 2.80mm so should self tap M3

Holes on the right of the case are for M5 Heat Inserts

RPI fan is for a 4010 axial fan

PG7 Gland Nut - for use of umbilical for Canbus wire to tool head

#update# - 3-4-2023

Mainbody case was found to have issues with the heater wire exit from the case for my setup.

Some of the standoffs were missing for the boards.

The buck converter stand offs are a tad bit off.

I have revised it to have the heater bed wire exist the back side using a PG7 Gland Nut.

I added back the missing stand offs. 

Revised the size of the hole for the usb coard for the U2C.

Revised the size of the holes for the Raspberry Pi.

Attribution to:

Neo SKRPi Case
https://www.printables.com/model/196812-neo-skrpi-case
by Neozoen

Box pro elektroniku na 3030 profil Box for electronics on 3030 profile
https://www.printables.com/model/49058-box-pro-elektroniku-na-3030-profil-box-for-electro
by Tom Idea C.