Master Switch Mounting

Three parts; main housing for the master switch, the mounting flange & the cover,
5h 37m
3× print file
0.30 mm
0.60 mm
118.00 g
0
6
0
89
updated March 2, 2023

Description

PDF

I needed to mount a master switch on a 12v distribution board I was making.

It is the long master switch with the additional contacts on the bottom for secondary switching.

I glued the flange to the body once I had the orientation finalised.

The top cover has two filament changes to get the white arrow and lettering. I wish I had added an extra white layer, making three, for less opacity. check the bridging angle when you slice to get the shortest bridging length.

The gcode files are for a 0.6mm nozzle.

Tags



Model origin

The author marked this model as their own original creation.

License