Bedside Remote Controls Hanger

This design was created from scratch to match my bedside table shelf (18cm)
In addition I've designed a small optional headset hook that hang on the remote-controls 'pocket'

The headset hanger is better printed on the side

The remote controls hanger could be printed in two ways:

• on the side - only if you know how to make your printer print a >50% angle and >15mm bridges.
• (Otherwise) Using support and printing it up-side-down.

Print instructions

Category: Bathroom Summary

This design was created from scratch to match my bedside table shelf (18cm)
In addition I've designed a small optional headset hook that hang on the remote-controls 'pocket'

The headset hanger is better printed on the side

The remote controls hanger could be printed in two ways:

• on the side - only if you know how to make your printer print a >50% angle and >15mm bridges.
• (Otherwise) Using support and printing it up-side-down.

  Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0.20

Infill: 15%

Filament: Generic PLA Black
Notes:

Printed with Prusa Mini