Ridgid Heat Gun nozzle mounts

When you buy a heat gun, you usually get a few nozzles with it. This Ridgid came with 2 additional tips. I wanted them to be hung on the wall in a nice fashion.

This will work with any heat gun with a nozzle size of 33.94mm.

I printed this out of some old leftover Orange (Ridgid) colored PETG. But, i'm sure it will work with any material just fine (as long as it is not too hot, cold, etc).

This takes about 30-40 minutes to print on my Prusa Mini+ with a Revo .6 nozzle. I only used a .3 layer hight and a 15% infill. I also had 3-4 walls as my thickness, so, do as you please…