Hamilton Beach 40DM Parts

These are some replacement parts for the Hamilton Beach 40DM Malt/Milkshake Mixer

• Screw Spacer: The 2 screws that hold the top/motor cover originally had what looked like 2 O-Rings or lock washers, either way they crumbled as soon as I loosened the screws on mine so here are some replacements. i printed these in TPU to possibly help with vibrations, but regular filament should work too
• Feet: These are about twice the thickness as the originals so it should space the mixer up another few mm from the countertop and possibly help more with vibrations. I printed these in TPU but regular filament should work fine
• Control Knob: I printed this standing normally as it would on the mixer, with some supports. Could probably be printed upside down without supports but use your own judgement on this