Cardboard Spool Arbor Rings - fits Overture spools

Just press them into the cardboard spool ID. These arbors can be used to prevent cardboard wear.
35
188
4
875
updated February 26, 2023

Description

PDF

Fits Overture Cardboard spools (and others?) with ~2.165 inch (55mm) ID.  Should be a pretty snug press-fit.  Remove them and re-use them.

Likely can be scaled up or down in XY to fit other size spools.  These have tapered ribs on them meant to dig into the cardboard.  

We use them with our spool holder clip when printing TPU and other filaments that don't sit in the AMS unit of the Bambu X1C (or P1P).  

The STEP file is also available on our website if you want to modify or remix it!  

I had printed these with a 0.6 nozzle, solid, at 0.3mm layer height. But pretty much any settings solid should work well. 

Thanks!

Performance 3-d LLC

 

This is originally a remix of this spool arbor from Filaments.ca

Tags



Model origin

The author remixed this model.

License