One of the threads for the cleats is off, the cleat isn’t seated right, also I now understand that this isn’t designed for the original Prusa MMU2S base.
Gravity Boots (for the Smooth Gravity Spoolholder - Rock On Edition)
This is my first planned add-on for the Smooth Gravity Spoolholder (which is a Remix of Michal Fanta's Gravity…
11
55
1
1325
updated September 17, 2020
Makes
Comments
What's the appendage on the left side of the base for? (edited)
I had 2 issues with this.
1. The slip-on add on doesn't work well with the Prusa original base. The original base has a flat bottom, and the 2 protruding parts meant to lock into your custom base don't work. I also feel like the entire unit may be slightly too small for the base (you can see it bow in the picture). Do you have an f3d file for the base itself?
2. I had issues with the threading of one of the cleats. The cleats were fine, but one of the holes was very loose for the cleat. What print settings did you use/recommend ?
View 2 more comments
I decided to just use your base instead. Required me to make a new filament clip which I did last night. Will likely post it as a remix of this.
I still think the base add-on has an issue with the threads on the right side, so you may want to double check it still.
Would you have the STL of the new filament clip?