Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts.Print two mounts
The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the center points of the slots. However, I tested it on Sim Labs Series Extrusion and it worked just fine.
https://www.tnutz.com/product/ex-1530-black-2/
https://www.tnutz.com/product/ex-1545-black/
This mount allows 1mm of clearance from top to bottom for the power brick. The clearance works perfectly fine, but I added a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo.
*There is no need to use supports, simply print with the Fanatec Logo on its side.
This is a Remix of colliert11's mount made for series 40 extrusion https://www.thingiverse.com/thing:5030383
Printer Brand:
Creality
Rafts:
No
Supports:
No
Resolution:
.20mm
Infill:
30%
Filament:
Black Post-Printing =============
Optional: Add a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo and possibly the sides.
Fusion 360
Category: Video Games
The author marked this model as their own original creation. Imported from Thingiverse.