Raspberry PI Case for camera, with flexible stand
Raspberry PI case for camera and flexible bottom-plates for different cords Flexible stand with different…
16
86
0
1558
updated February 4, 2023
Description
PDFRaspberry PI case for camera
and flexible bottom-plates for different cords
Flexible stand with different alternatives, tablemount, wallmount, link arms. Build what you need !
Print instructions
| Raspberry PI Case | |
| File | Comment |
| RPI Case.stl | The box to hold the Pi *1) |
| RPI Case Lid w camera B.stl | The lid, with pins to hold the camera |
| RPI Case Lid w camera C.stl | The lid, with screwholes *2) |
| RPI Case Bottom.stl | Bottom plates with hole for powercord *3) |
| RPI Case Bottom B.stl | Bottom plates with holes for powercord and network cable *3) |
| RPI Case Bottom C.stl | Bottom plates with holes for powercord and network cable, for RPI 4, *3) |
| Notes | |
| *1) Please use screw M2.5x4 | |
| *2) Please use screw M2x3.5 or M2x6 with one nut | |
| *3) Please make two of each for one of the alternatives | |
| Raspberry PI Stand | |
| File | Comment |
| RPI Case Stand.stl | The grip to hold the box, exact dimensions |
| RPI Case Stand B.stl | Grip alternative with gap 0.25/0.5mm, may fit better |
| RPI Case Stand Tablemount.stl | Tablemount |
| RPI Case Stand Wallmount.stl | Wall-/roof-mount, alternative |
| RPI Case Stand Wallmount B.stl | Wall-/roof-mount, alternative |
| RPI Case Stand Allround Part One.stl | Wall-/roof-/table-mount part one *1) |
| RPI Case Stand Allround Part Two.stl | Wall-/roof-/table-mount part two |
| RPI Case Stand Allround Bolt.stl | Bolt to Wall-/roof-/table-mount *2) *4) |
| RPI Case Stand Link.stl | Short link |
| RPI Case Stand Link B.stl | Short link with holes *3) |
| RPI Case Stand Link Medium.stl | Medium link |
| RPI Case Stand Link Medium B.stl | Medium link with holes *3) |
| RPI Case Stand Link Long.stl | Long link |
| RPI Case Stand Link Long B.stl | Long link with holes *3) |
| M8 Bolt.stl | M8 Bolt *4) |
| M8 Nut.stl | M8 Nut *4) *5) |
| Fast nyckel 13mm v1.stl | A tool for the bolts and nuts of course :-) |
| Notes | |
| *1) In Slicer, use Support on build plate | |
| *2) In Slicer, the bolt should be scaled 95.6% for X and Y, to fit the nut | |
| *3) Links with holes, for cords maybe? | |
| *4) In slicer 50-100% infill for resonable strength | |
| *5) Please note that the nut should be scaled 104.6% for X and Y in the slicer, otherwise it won't fit the bolt | |
Tags
Model origin
The author marked this model as their own original creation.
