Note: Only one LED Option is required. Either the Neopixel Mini Button, or the Rainbow Barf Logo LED
Printing
Use standard Voron print settings for all parts.
Print the main_body stl for your printer.
use a clear filament for parts with the [c] prefix.
for Rainbow Barf, print [c]_rainbow_barf_diffuser.stl and rainbow_barf_carrier.stl
for Neopixel Mini Button print [c]_neopixel_button_diffuser.stl and neopixel_button_carrier.stl
Assembly
Remove the 2 supports inside the hexagonal hole of main_body
Install 2 heatset inserts into the back of main_body
Press the clear diffuser into logo_insert
Press logo_insert into main_body
Press LED (Rainbow Barf, or Neopixel Mini Button) into the appropriate carrier. Solder wires either before, or after if necessary. (you may not be able to fit a jst connector through the carrier)
Fit the carrier to the back of main_body and fasten with 2 M3x6 BHCS
Attach main_body to the front of the kirigami bed frame, using 2 M3 hex nuts and 2 M3x6 BHCS
Credits
Cameron at LDO Motors for the initial work on fitting a StealthBurner diffuser in the design
WhoppingPochard and VinnyCordiero for the Rainbow Barf Logo LED
The most up to date version of this mod can always be found on GitHub