Clean Dirty Dishwasher sign

Dishwasher slider sign
24
169
4
1047
updated February 24, 2023

Description

PDF

This is a remix of Jimbotron's Dishwasher slider on thingiverse (Clean Dishes, Dishes Dirty, dishwasher sliding sign by Jimbotron - Thingiverse). 

I didn't have the magnets he was using, so I remixed it with 8 6x2mm magnets that I had. Added a drop of superglue in the hole to hold the magnet.
I also added a small handle on the slider to make it easier to slide back and forth.

The slider will need to be printed face up with supports.

0.2 mm layer height.

Color Changes on Base
Start with Gray
@ 3.0mm or Layer 15 change to Red "for Dirty"
@ 3.8mm or Layer 19 change to Green "for Clean"
@ 4.4 or Layer 21 change back to Gray

Color Change for Slide (Printed face up: supports needed), I also printed at 101% to allow it to slide easier.
Start with Gray
@ 7.0 mm or Layer 35 change to Black "for Dishes"
@ 7.8 mm or Layer 39 change back to Gray

I used a drop of glue on the base to keep the slide from coming off.

Model origin

The author marked this model as their own original creation.

License