20x4 LCD Case | Arduino
Its a case for an LCD Case with dimension 20x4.
Perfect fit with the I2C Serial on the back.
41
575
2
2513
updated February 25, 2023
Description
PDFHi everyone, this is a case for a 20x4 lcd.
It has an I2C on its back. As you can see the cables for the I2C going out on the left side.
It has holes on its back to mount it where ever you want.
Bring front and back together with screws. I used 3.0mm for it. If you want them the same depth like on the picture, just screw them in for a bit and break the inner plastic circle. Afterwards you should be able to screw them deeper.
Happy printing. :)
Tags
Model origin
The user re-uploaded this model. The user is not the original author of the model.
