Hi,
I wanted to brag about making a copy of my mouthpiece. I took off the dimensions, but I made a few modifications during the design process, e.g. ergonomic 😃 place for the index finger and enlarged culvert. PLA material, 100% filling, made on a 3D printer.
Advantages:
-He warms up quickly, so winter is not terrible for him
I get tired less while playing
Defects:
I had to sand the rim of the cup because it scratched
-Some say the sound is duller
I haven't found any other flaws yet
I've already played a few rehearsals on it and a concert, it sounds good, the difference in sound between my previous mouthpiece and this one is, in my opinion, very difficult to detect. (The bandmaster didn't notice :D)
The size in the slicer must be set to X - 40.07mm Y - 40.07mm Z - 86mm
________________________________________________________________________________
Cześć,
Chciałem się pochwalić wykonaniem kopii swojego ustnika. Zdjąłem wymiary, ale przy projektowaniu wprowadziłem parę modyfikacji, m.in. ergonomiczne miejsce na palec wskazujący i powiększony przepust. Materiał PLA, wypełnienie 100%, wykonany na drukarce 3D.
Zalety:
-szybko się ogrzewa, więc zima mu nie straszna
-mniej się męczę podczas grania
Wady:
-musiałem zaszlifować brzeg kielicha, bo drapał
-Niektórzy mówią że dźwięk jest bardziej matowy
innych wad jeszcze nie wykryłem
Zagrałem już na nim kilka prób i koncert, brzmi on nieźle, różnica w dźwięku między moim poprzednim ustnikiem a tym jest moim zdaniem bardzo trudna do wychwycenia. (Kapelmistrz się nie zorientował :D)
Rozmiar w slicerze trzeba ustawić na X - 40,07mm Y - 40,07mm Z - 86mm
The author marked this model as their own original creation.