SV06 Extruder Adapter Plate (Multiple Versions)

Printable versions of the SV06 extruder adapter plate.
16
50
0
929
updated February 20, 2023

Description

PDF

The stock SV06 extruder adapter plate is made of aluminum with threaded stand offs to mount the extruder PCB / breakout board.

I took the official step file from Sovol's SV06 github page and converted the threaded standoffs for the PCB / breakout board to use standard M3 nuts and M3 10mm screws.

 

Versions:

  • Stock
  • Blank w/ PCB standoffs - Filled in the stock extruder holes so you can have a blank canvas to build your project on.
  • Blank w/o PCB standoffs - Like above but with the PCB standoffs also removed.

 

Printing:

  • Align the flattest face of the part with the build surface.
  • Supports optional but using the on build plate only supports for the recessed nuts can be helpful. 
  • 0.2 layer height (optional: 0.15 first layer height helps with one of the mounting holes that is close to the edge).
  • Perimeters: 2 or 3 seem to work fine
  • Solid infill
  • Filament: Depends on what you're building heat wise.

Tags



Model origin

The author remixed this model.

License