Mini LED Lava Lamp

This is a Mini LED Lava Lamp that is a nice decoration. It uses a single LED and a CR2032 battery for power. It prints quickly and easily. You can print in any colour or even add a RGB LED! Its up to you! For best results, use the included pre-sliced files or open the .3MF files in Prusa Slicer for best print settings and a colour change to print in one piece.

This design uses Compact LED Light for CR2032
by skriver from Thingiverse to shine into the Lava Lamp. Please download the STL if you need it here:

https://www.thingiverse.com/thing:525799

Print instructions

The .3MF files have a colour change at the right spot for the model to print in one piece. It is recommend to use them.

There are two versions of the Lava Lamp itself. One has a spacer with cutouts so that it sits snugly on the LED Light by skriver. The other one is just the Lamp with a hole for a LED at the bottom.

This design uses Compact LED Light for CR2032
by skriver from Thingiverse to shine into the Lava Lamp. Please download the STL if you need it here:

https://www.thingiverse.com/thing:525799

Please use this PDF for instructions:

https://drive.google.com/file/d/1VIuT24XR5Od8Gn1puM-AYtDtCV_SX8a3/view?usp=sharing