Qidi Xmax 2 Filament Drybox Holder Arm Remix

This is a remix of the holder arms to use a Sunlu drybox with an XMax 2 with a filament runout sensor.
10
22
0
450
updated February 18, 2023

Description

PDF

This is a remix of the drybox holder arms to work with a Qidi XMax 2 with a filament runout sensor.  It will use the original sized holder bed from the original model author without any changes. These arms include an offset to account for the XMax 2's extended back cover and lowers the holder down enough so that the filament portal in the Sunlu dryer is at the correct height for a straight feed into the runout sensor.  

As this is a very large print, I have broken it into 3 parts that can be glued together to support the drybox.  They will fit on the 300x250 XMax 2 bed and can be printed simultaneously. The connection posts are tight and can be joined together after some light sanding to reduce the size slightly. I used minimal supports to support the bottom of the connection posts. 

I printed this at a 0.2 layer height with 20% infill.

Tags



Model origin

The author remixed this model.

License