Tap to Join WIFI

This is a model that you can leave in your home or business that will enable guests to automatically join your WIFI using an embedded NFC tag/sticker.  At this time this is only supported on Android devices--it is not currently supported on iOS.  Use a NTAG215.

The model prints standing up (you must print it this way!), and you can add a brim if you want extra adhesion to the build plate.  When slicing, add a pause or filament change two layers before the top solid layer.  While the print is paused, stick the NFC tag on the top of the model, and then resume printing.  It should print over the NFC tag without issues.  Add a color/filament change for the letters so you can better see the words.

To program the NFC tag, use an app such as “NFC Tools” to write the data for joining your WIFI.

Enjoy!