I made this for my son's school project. I made the parts individually so that we could use different color filaments.

214

1458

8458

updated May 7, 2024

Matt Blanco

@MattBlanco_2642878

Used this as a base for my girlfriend who needed to make a model out of candy. Simple to make and clean design.

J 2

Josh DeBoer

@darkstar_2042651

Some parts won’t load…

asanizq

@asanizq_1563088

I modified some pieces to place better in the model.

Stanley

@Stanley_52454

Some models need to be modified to fit together but great model

S 9

sevenbravo

@sevenbravo_257255

@Stanley_52454 I thought I got them all fixed...I need to reprint this and double check everything.

Stanley

@Stanley_52454

How should NUC parts fit together? there is no cutout for NUC center piece?

Lucas Ribeiro

@LucasRibeiro_1251048

Great design, thanks a lot. I used lightning infill at 10% for the white part. I alwo print it at 150% scale.

Richard hill

@Richardhill_890010

I just printed this and cannot for the life of me figure out how to put the nucleus together like you have in the picture. The 3 pieces you have listed for nucleus do not match that of your completed print put together. What am i missing?

View 4 more comments

shoDaN

@shoDaN_1061312

@sevenbravo_257255 great model, thank you for it!
i seem to be having the same problem with nucleus as @Richardhill_890010
i can not find 'those extra parts' you mentioned. would it please be possible to double-check?
thank you!