Fein to Makita LXT Router Adapter

Adapter a Fein vacuum to a Makita LXT Router. Probably works with festool vac too. Probably works with other Makita trim routers too. All probably :)

The Fusion 360 file included has a parameter "wall" which is 2mm in this print/model, but can be adjusted by just changing the parameter for your needs.

Probably not stable enough to be used on an edge, the vac is pretty heavy (though I often hang the hose from the ceiling), but works well on flat surfaces.

Both nozzles are slightly tapered to match their respective ends and makes for a quite tight fit.

Print instructions

The pictured one was printed in resin, but this should print totally fine just sitting on the bed in FDM, no supports etc required.