Cande Light Holder designed to hold a Tealight.
I've included three ready to print g-codes. Just select your material and start printing.
For the prints seen in my photos I used white ABS, Prusament PETG Ultramarine Blue and Prusament PLA Mystic Green.
When you decide to edit the slicer settings make sure to set it to Spiral Vase Mode.
Note for PET
PET sticks really well to the Printbed, make sure to add a gluestick layer to ensure you can remove it without breaking the light, since its very thin and fragile. The included g-code for PET will print on the rear right area of the print bed.
The author marked this model as their own original creation.