Mario Kart LIVE Turn Sign - Layer Change Version

I didn't like having to print the arrows and frame separately and glue them in, so I remixed this in Tinkercad to be printed all at once and just change filament at a certain layer.

You could also paint it I guess.

I also wanted this to print on my Ender 3 S1 Pro bed and take up as much space as possible, so the sign is 220mm wide and works perfect on my bed.

Just make sure that you do not have a brim or skirt enabled and if you print a primer line, either don't do it, or pull it really fast before the main print starts (what I do).

For me, I used .28 layer height and in Cura added a filament change at layer 13 and it worked awesome.

I used ironing on the first sign I made, but decided it wasn't worth the extra time, so I stopped that so I could bang out a bunch more.

For me, it was 68grams for a single sign and about 5g for each foot (you need at least 2 or could change the z height dimension to get away with just one.

The 'feet' are just barely tight enough to hold on in my printer, but depending on how your tolerances are, you may need to scale it up or down as you see fit.

Thanks for the original design!

Print Settings

Printer Brand:

Creality

Printer: 

Ender-3 S1 Pro

Rafts:

No

Supports: 

No

Resolution:

.28 height / .52 line width

Infill: 

15% lines

Filament: Polymaker Matte PLA White, Red

Notes:

You can change the infill to what you want, as with anything else.

The overall width is 220mm which just fits my bed perfectly, but you can scale this up or down if you want. Just do the same for the feet if needed if you are also changing the z height dimension.

I added two more ‘feet’ - 1 that's 30mm tall and another that is 40mm tall and 5mm wider.

Category: Video Games