Moon Lamp stand/socket for LED circuit

I was looking for an adequate stand/socket for the amazing moon lamp made by moononournation. He designed a special version of his progressive detail moon lamp with a thread to screw in a base at the bottom. Unfortunately there are no instructions for his base and how you can fill it with a LED. So I came up and designed a stand for myself, compatible to the thread of the moon lamp. A LED circuit fits perfectly and the lamp can be recharged from underneath.

The stand/socket is ready to use a LED circuit like this one. (Check dimensions of your board)

You need the moon lamp file from here.

The file is "moon_lamp_4_inches_refinement_level_360Y10_16mm_screw_socket.stl"

Be aware of a very long printing time for the moon :-) Mine took almost 40h due to the detail of the print with resolution 0.1. Printing time for the stand is about 5-7h depending of the printing speed.

Printing 100% scale of the moon and stand and both parts will fit very well. For the stand set resolution to 0.15 to give the text on the stand a quality shape.

Print it laying flat.