Fast printing Case for Arduino Mega with RAMPS 1.4
This is a case for Arduino Mega with Ramps 1.4 to controll motors.
11
200
3
833
updated February 13, 2023
Description
PDFI did not find a nice enclosure for a Ramps 1.4 so i made one.
You need 6 M3 x 10mm screws for the enclosure and 4 M4 x 15mm screws to mount a 80mm fan.
Its printable pretty fast as the enclosure is not really thick, still rigid enough for its usecase. Took me about 2 h on my X1C.
If you have any questions feel free to contact me!
Tags
Model origin
The author marked this model as their own original creation.
