Hobby paint holder / carousel

Bottles up to 35mm Revell small paint cans
4
26
0
380
updated February 12, 2023

Description

PDF

hhI needed some better storage and visibility for my hobby paints, so I made a modular paint holder. Can be used in any combination you need.

Paint bottles up to 35mm

Revell small cans

You will need

  • 6900z (10x22x6) bearings. 
  • M10 threaded rod
  • M10 nut

I've printed them with

  •  ABS (ABS is a bit more forgiving as you will have to smack the bearingsin there with a mallet  so a brittle filament might cause it to crack.)
  • 0.4mm layer height (0.6mm nozzle)
  • 20% lightning infill
  • 3 perimeters
  • Supports from buildplate.

The  holders will spinn without bearings, can use a washer to reduce the friction but for best spinnage use bearings.

To stabilize the whole thing a M10 threaded rod is used and in the bottom piece there is a M10 nut pocket. 

Surprisingly sturdy standing on the base with 4 sets of both paints and a top. I will be suspending the thing from the ceiling (rail or arm not decided yet).

 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more