English follows
Náš model cívky byl optimalizován na základě našich zkušeností a problémů s cívkami z jiných projektů. Byla dlouhodobě testována s refill filamenty společnosti Fiberlogy.
Viz příklad zde.
Model Hotend Master Spool byl inspirován RichRap Master Spool, ale byl kompletně přepracován a vytvořen od základu znovu. Nápad na tuto novou cívku přišel od nás (hotend.cz) a vymodeloval ji velmi šikovný Radek z Miss3. Děkuji Radku a Miss3.
Cívka je navržena pro tisk z PLA nebo PETG. V případě tisku z ABS, ABS+, ASA doporučujeme zvětšit celý model ve sliceru o 0,7 % ve směrech x a y.
Refill je samotný filament bez cívky. Filament se dodává v sáčku a drží pohromadě díky třem stahovacím páskám. Přesně pro tyto pásky jsou v naší cívce vytvořené otvory. Po nasazení filamentu na špulku a sešroubování pak jednoduše stahovací pásky přestřihnete.
Je šetrnější k životnímu prostředí a levnější ve srovnání s filamenty nabízenými na jednorázových cívkách. Kromě podpory ekologičtějšího hospodaření odpadá manipulace s prázdnými cívkami a pro uložení filamentu je potřeba méně místa. Své cívky si můžete vytisknout v provedení a množství jaké aktuálně potřebujete.
The spool has been optimized based on our experience with the shortcomings of other projects. It has been tested for a long time with fiberlogy's Refill Filaments.
See example here.
We will be happy if you write us your experience.
Benefits of the design:
Model of Hotend Master Spool was inspired by RichRap Master Spool, but was completely redesigned and build from scratch. Idea for this new spool came from us (hotend.cz) and modeled by super skilled Radek from Miss3. Thank you Radek and Miss3.
Spool is designed to be printend from PLA or PETG. In case of printing from ABS, ABS+, ASA we recommend to enlarge the whole model in the slicer by 0.7 % (7 per mil) in x and y directions.
Refill is a filament without a spool. The spool is used repeatedly. This master spool can be printed by anyone, for example by our Hotend Master Spool or e.g. RichRap project.
First of all, it is more environmentally friendly and cheaper compared to filaments offered on disposable spools. In addition to promoting greener management, handling empty spools is eliminated and less space is needed to store the filament. You can print your spools in the design and quantity you need.
The author marked this model as their own original creation.