Thanks to davidmarhoefer for his model, which inspired me to create this part!
I needed a holder for a Hue Dimmer Switch. It is designed to sit on top of a post, behind the bedhead. → Easy accessible for both of us and nearly invisible.
Therefore, I created this model in two parts: One universal top part and custom bottom part:
The top part can fit a magnet (cylinder: d=10mm, h=2mm) in the middle. In my opinion, the screw head is enough for the magnet in the switch itself and no additional magnet is needed.
The bottom part clamps on top of post at our bed frame. Feel free to edit this part.
I decided to split this part into two parts and print them as shown. This needs glueing but it needs no support and gives nice surfaces.
Printed in white PLA and glued with “UHU Allplast”.
You can download or edit the original cad file here in onshape: https://cad.onshape.com/documents/0dd883a5c3629b82f54f1381/w/4474bbe47b97a1d1b289f90f/e/7dcd139d05736636ba40709a
The author remixed this model.