This is my own design of a leather honing wheel. If you have the Tormek T8/T7 drive wheel it will fit.
You can Upgrade your old SA-250 or Supergrind 2000 Versions with the original T8/T7 drive wheel as well! Alternative you can drill out 3 of the 6 holes of the old wheel. This will also work great.
Summary:
This leather wheel works with all 250mm Tormek Versions from SA-250 -> T8
Specs:
Diameter: 210mm + 5mm thick Leather = 220mm disc
I glued my leather to the disc with 2k epoxy. Superglue also works very well.
The author marked this model as their own original creation.