Valentines Lantern for LED tea light candle

Taking inspiration from the Christmas Lantern from MaxT, I decided to do one for Valentines Day!

A very well calibrated printer is required as everything relies on just the first layer!

DO NOT USE REAL CANDLE (The print will melt)

This 3D print consists of:

1. The base
2. The inner layer
3. The middle layer
4. The outter layer

Filament: PLA 
Nozzle: 0.4mm
Support: Not needed
Brim: Not needed
Infill: Not needed (10-15% infill for the base)
First Layer Height: 0.2mm

Print the model with the text oriented down so that the layer facing outside is smooth like the bed. Example below:

In order to keep print from being warped when removing from the bed, let the print cool down before removing with the scraper/spatula

LED TEA CANDLE was used 

From Amazon: https://www.amazon.ca/Flameless-Tea-Lights/s?k=Flameless+Tea+Lights

Assembly

1. Slot the tabs into the slits on the other end of the inner layer together to make a ring
2. Place the inner layer ring onto the base
3. Repeat steps 1-2 for the middle layer, and the outer layer. 
4. Place LED tea light into the center

Enjoy and have a Happy Valentines Day!