Stand for single vase mode rose

This model was designed for https://www.printables.com/de/model/146464-a-stem-in-vase-mode (for https://www.printables.com/de/model/131488-spiral-vase-rose/remixes ) to be able to hold a single rose. 

Opposed to the model it's designed for, this one is not to be printed in vase mode.

I used the following settings for my SuperFilament PLA (green):

• layer 0.16 mm
• supports: none
• brim: none
• raft: no
• nozzle: 0.4 mm