PTFE Pass Through Coupler Bracket
I recently built the MK3-MMU2s enclosure posted by Strita, it can be found here…
48
309
3
2477
updated June 27, 2019
Makes
Comments
@Ryuujin_152915 I love the color!
(deleted)
Awesome, I'm glad they will help out. =)
This was exactly what I needed to attach vertical PTFE fittings to my wire shelving unit with zip ties. Extremely easy print and allows for the threads of the PTFE adapter to tap its own threads. Printed in CF-PETG.
View one more comment
@OldSalty3D definitely! Forgot to share for those that might be in a similar situation. I’ve run several prints with this setup so far and it’s been great.
Sorry for late response, I've been out at sea for the past 3 months. That looks like an awesome setup.
It helps a little bit, i used extra strong two-side tape to glue it to Lack table top, instead of fixing with screws, as it get few attempts to balance tension on those.
Works very well (PETG).
Works well
Works well, printed fast and without any problems