Hi!
This one is a previous version ofDragon egg boxes (http://www.thingiverse.com/thing:1995900) .
This is the first try to make an sphere but something went wrong with formulas and i get a 'egg'. Great!!, just add some spikes and i have a dragon egg!! Wooo!!!
Not developed as a box, just as a decoration figure. Based on a simillar algorithm (Phyllotaxis patterns) you can customize and generate many differents eggs.
For more info, please visit Dragon egg boxes (http://www.thingiverse.com/thing:1995900) and you'll find a comprehensive customizer explanation.
Include a ZIP file with many eggs generated during development and testing.
I used MakerbotLonghuo the Eastern Dragon (http://www.thingiverse.com/thing:305752) and thecute dragon of bs3: (http://www.thingiverse.com/thing:1469139) for the pictures.
Hope you enjoy it.
Have fun!
Printer:
BQ Prusa i3 Hephestos
Rafts:
No
Infill:
15-25%
Notes:
Resolution:0.2 or 0.3 works good. (0.1 if printing small eggs)
**infill:**15-25% infill it's good to avoid holes on roofsLayers: 2 bottoms, 2 shells and 3 tops(to avoid roof holes)
Supports: printing the complete egg youll need supports. Some figures need supports due to spikes orientation
Printing tip:Use your slicer to make 2 half-eggs. See a mini-guide below
Using your slicer to split eggs in two parts
I do this in big figures to avoid using supports, also the spikes doesnt print well when oriented down.
I useCura but most of slicers can do this
Category: DecorThe author marked this model as their own original creation. Imported from Thingiverse.