Voron Stealthburner SB2040 Widebody

The stock Voron Stealthburner does not give enough clearance to easily use the HV_ENDSTOP port on the Mellow SB2040 when installing the TAP nozzle-based z-probe. This wider main_body and cable_cover give enough room to access that port, and to use a 3007 pcb cooling fan in combination with the stock pcb heatsink.

Print using Voron standard settings:

• Layer height: 0.2mm
• Extrusion width: 0.4mm, forced
• Infill pecentage: 40%
• Infill type: grid, gyroid, honeycomb, triangle, or cubic
• Wall count: 4
• Solid top/bottom layers: 5
• Supports: NONE

I sunk the heat-set inserts directly into the fan housing.