Mobile scanner stand Mod

Now you don’t need a separately clamp for the table.
I have modified the bottom_mount you can screw it
direct on the table with a 3D printed screw
and a 3D printed pipe

Printer : Artillery Sidewinder X2

layer height : 0,3    line width : 0,8

infill 20-30%  ;  print time ~  10 h

Jayo Gray PLA Meta

MakerWorld : https://makerworld.com/en/@sweb3791

My Models : https://www.printables.com/de/@CB_384764/models

I have modified the bottom_mount with a thread on the bottom

and i add a printed Screw

and i add a printed Pipe

I have modified the sliding_phone_mount to fit with the pipe