Magnetic RFID tag

I have created some helpers to build magnetic RFID tags. I use these tags for my music box. The magnet is used to keep them in place.

The RFID tag is based on 4 components:

• RFID tag (NXP ICODE SLIX-L)
• 10mm x 3mm magnet (https://www.amazon.de/gp/product/B07MMB2F45)
• Spacer
• Box “Münzkapsel” (https://www.amazon.de/dp/B08NVZ585K)

The spacer is used to hold the magnet in the middle. No glue is needed, just some force to put it in place. 

Additionally there is a stencil than can be used to mark the cut line for the RFID tag to fit into the “Münzkapsel”. The inner diameter is 40mm. The stencil can also be used to create round images of prints that can be placed inside the box for visualization.