Simple trophy for a a beer pong contest.
21
76
0
626
updated February 4, 2023

Description

PDF

My brother wanted a trophy for the beer pong contest at his 30th birthday. so i designed this simple one in 4 mostly easy printable parts without the need for any supports.

The stand i already in the right orientation but the cup has to be layed down flat in the slicer as well as the beer model. For the ball i split it in half in the slicer and glued it together.

After the print i taped the outside of the cup and sprayed the inner part white. after that i glued ever part together to build the complete trophy.

i used pla for blue, red and white and petg for yellow filament since i had no other filaments in the needed colors on hand.

0.2 layerhight, 3 perimeters and 10 % gyroid infill worked pretty well for me. originally i wanted to emboss something like “beerpong master 2023” within prusaslicer 2.6 alpha2 but i could get it to form properly around the surface. maybe on a later version. 

Tags



Model origin

The author marked this model as their own original creation.

License