Alabama Crimson Tide Coaster Box

This is a box to hold Alabama coaster that I found online.
13
51
0
276
updated April 4, 2023

Description

PDF

I have included the Solidworks file to hold eight 4" coasters. I have also included a generic 3MF file that has an engraved logo in the bottom. If you wish to insert the A into the engraving then print the A from https://www.thingiverse.com/thing:1677267/files and size it 30%. Then adjust Z only (not X or Y) to 3mm. Finally, I suggest printing the A with X-Y hole compensation of 0.5mm and X-Y contour compensation of -0.5mm. If you have a Bambu Lab printer with AMS then use the X1C file. It has the A set into the bottom and printing in a different color in one print. The A on the outside is just the A used for the inset at the bottom of the box except no X-Y compensation applied. It is a separate print glued onto the box. The coasters are from https://www.thingiverse.com/thing:4630075 and colored in Bambu Studio. Please note that the original A used and the coasters are the work of others. My contribution is the box. Filaments are Bambu Lab Basic Red, Bambu Lab Sparkle Crimson Red and Bambu Lab Matte Ivory White. I used standard settings except I turned on ironing for all top layers. 

Tags



Model origin

The author remixed this model.

Roll Tide
by Intector (thingiverse.com)

License