DIY LED for Bambu Lab P1P - Side Mount
Sliced .3mf for P1P in PLA. Just load and print.
(Some people recognize printing problems, i cant confirm, but let it be a warning to you! Maybe it is better to slice it by yourself, depending on your requirements and filament)
PLA works fine for me, no problems with heat deformation.
It can be fixed with 2 original Bambu Lab screws (or other suitable ones)
What else you need:
- 5V LED Strip (15cm)
for example:
(https://www.amazon.de/dp/B09VGR6PWH?psc=1&ref=ppx_yo2ov_dt_b_product_details)
or:
(https://www.amazon.de/dp/B09SWQPDHC?psc=1&ref=ppx_yo2ov_dt_b_product_details)
- JST GH1.25 2Pin Plug
- cable
Warning!
The LED connector (GH 1.25) on the P1P's AP board is only suitable for 5V and 0.3A !!!!
Make sure that your LED does not exceed these values!
The USB-A Connector is suitable for 5V and 1.5A. Do not confuse!
The author marked this model as their own original creation.