Skådis Pegs with 5mm Pin diameter
Three versions of a simple 5mm pin for IKEA Skådis. It uses a T-nut to be mounted to the board.
20
110
4
486
updated February 3, 2023
Description
PDFAs I looked for a simple Skådis pin to hold my steel ruler, I wasn't successful, so I created my own. In the end there were three versions. One straight and two slanted (up- and downwards).
To attach the pegs to the board the T-Nuts for Ikea Skadis Pegboards system from 6d6178 are used.
Print with support activated and the backside of the pegs oriented to the print bed.
Tags
Model origin
The author marked this model as their own original creation.
