This design took me a couple weeks to get right.
Both swords are my best representation of a replica of the swords Thor used during the arena scene with The Hulk.
The real swords are 0.90m (3ft) and these swords are right at the 3ft mark.
Both swords have lines that go throughout the blade that line up with it's respected pieces which makes for easier understandable connection areas. They both have connector pieces which are all the same size besides the 3 long ones and they 3 are the same size.
I have provided pdf drawings for both swords if needed for better understanding.
I left a full (uncut) version of the sword to download for the miniatures or if you have a belt 3d printer.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
12%
Filament brand:
Overture
Filament material:
PLA
Notes:
Each blade piece was printed upright, but print them how you desire. If you choose upright, I would recommend either using a raft, brim, or a glue stick because some of the parts are too thin and have a small surface area so they do not adhere well sometimes.
The author marked this model as their own original creation.