Height adjustable feet for the IKEA LACK. The feet increases the height of the table by a minimum of 43mm and is adjustable up to approximately 62mm, it is also very useful for leveling you LACK table. The feet are mounted underneath the table leg with up to 4 screws each. I have also created a lower version of these feet, this version can be found here: https://www.printables.com/model/412882-ikea-lack-height-adjustable-feet-low.
I have created two different versions of the adjustable screw, one with a completely round base, and one with cutouts making it easier to grip when adjusting.
The tolerance between the base and the screws are quite tight, so you might need to scale the screws down a bit on the X- and Y-axis, if they're too tight.
For one LACK table you will need to print 4 sets, each consisting of the foot-base and one of the foot-screws.
The author marked this model as their own original creation.