Handschuhtrockner | Glove Dryer

This is a Remix of the glove dryer by gadgetmind
I drawed the top with Fusion 360 and made the top a bit thicker, reduced the capacity to one pair of gloves and added a hole for a switch.
Also made rubberfeet for the base.

use base and glove insert .stl from original source files by gadgetmind

Print instructions

Category: Hobby Summary

This is a Remix of the glove dryer by gadgetmind
I drawed the top with Fusion 360 and made the top a bit thicker, reduced the capacity to one pair of gloves and added a hole for a switch.
Also made rubberfeet for the base.

use base and glove insert .stl from original source files by gadgetmind

Print Settings

Printer: Zaribo 320

Rafts: Yes

Supports: Yes

Resolution: 0.3

Infill: 20%, gyroid

Filament: Extrudr, Prusament GreenTec Pro, PC, Flex blue, black, green
Notes:

If you print the screws, use a layer thickness of < 0.15mm and an infill of 100%