Rush hour rules are easy. Clear the way for the red car to be able to leave the parking lot. Cars can move only forward/backward, no lifting the cars!
Printing:
- Depending on the challenge difficulty, you'll need to print up to 4 trucks and 12 small cars. One of the small cars must be printed in red.
- Parking lot can be printed using filament color change in a layer to highlight lanes and arrows
- If you want the room to storage challenge cards, you can print attached container.
- No supports needed.
Other hardware:
- Besides filament, you'll also need 72 pcs of cylindrical neodymium magnets 5x1 mm (diameter x height). It is not mandatory, but it's much more comfortable to play with magnetic cars. Use supper glue to attach magnets to place.
- For container, you'll need 8 pcs of neodymium magnets 8x3 mm.
You can generate challenges using online generator, for example here. If you decide to print them, recommended maximum card size is 125x125 mm. I attached several example challenges.
Future outlook: I might build a travel box.
Note: Model is roughly inspired by: https://cults3d.com/en/3d-model/game/chinese-sliding-block
Tags
The author marked this model as their own original creation.